Once you have placed an order with Custom Glaze you will be visited by one of our highly trained conservatory surveyors who will confirm with you the exact details of the conservatory. He will explain fully where we are to dispose of the water from your new roof, the exact position of the conservatory, brick type and colour and he will be ready to answer any questions you may have.

The next stage is a confirmation of starting times and dates, which will be confirmed with our building manager.

Once on site we will clear any slabs etc to one side or will remove them from the site for you: we will then commence the digging for the footings. These are a minimum of 600mm or 1000mm for a higher wall. Concrete is then poured into this trench and brickwork is laid to damproof membrane level.

With insulation and steel mesh the base is trowelled off to the finished level. The low dwarf wall is then built up to the agreed height, which is again fully insulated. The inside of this brickwork is either plastered or left as face brickwork. During this time the electrical cables are run through for electrical points and lighting. We are now ready to continue with the conservatory and completion.

Illustration on the right shows the cut through slice of a conservatory,
please click on the image to see it enlarged.